• Factory-Direct · OEM/ODM Available · Global Shipping · 1:1 Technical Support
Facebook-f Youtube Linkedin
H·EASY Industrial Digital Textile Printer Manufacturer
Get a Quote
Built for on-demand small runs · Direct-to-Garment (DTG)

H·EASY 4050 High‑Precision DTG Printer

Powered by Brother industrial piezo heads (min 3.5 pl), with independent white/CMYK for one-pass dark-garment coverage. The A2 40×50 cm platen and manual height adjustment support garments up to 10 mm. White-ink circulation + bulk supply keeps uptime high and daily maintenance to minutes—ideal from sampling to short-run production.
Request a Demo
Download Specifications

Product Features & Benefits

Why Choose HEASY Direct-to-Garment (DTG) Printing

※ Actual equipment configuration shall prevail.

Brother industrial heads with 3.5 pl minimum drops deliver smooth gradients and micro-text clarity over long runs.

Independent white/CMYK channels enable high-opacity white with vivid color on dark garments.

Reference speeds—A4 light ~50 s, dark ~64 s; A3 light ~88 s, dark ~103 s (design-dependent).

Works with cotton, canvas, blends; manual height handles garments up to 10 mm (hoodies, pockets, totes).

White-ink circulation/agitation + bulk tanks with timed purging/capping reduce settling/clogs and TCO.

No screens, profitable from one piece; templates/queues shorten order-to-ship and keep cost predictable.

Brother Print Engine · Stable Tone · Sharp Details

  • Brother industrial piezo, 3.5 pl min drops for smooth tones & crisp edges.

  • Independent white & CMYK for one-pass coverage on dark garments.

  • Bi-/Uni-directional modes to balance speed/quality.

Uptime & Maintenance · White-Ink Management

  • Circulation/agitation + timed purging/capping minimize clogs.

  • 1 L / 5 L supply, approx 1,500 ml onboard.

  • Minutes-level daily routines; fast to train.

A2 40×50 Platen · Manual Height ≤10 mm

  • A2 (40×50 cm) platen; plate change via manual jigs/templates (no quick-swap).

  • Manual height (no auto lift): measure peak points, set gap, run a dry pass.

  • Use alignment aids to improve repeatability.

Application Scenarios & Effect Demonstrations

Where H·EASY DTG 4050 Excels

delivering high-resolution, soft-hand prints on a wide range of woven and stretch fabrics.

a5e464f56ff09714dbe01aa88e16dd9327de273c67a8ddeb489bfdd6f90db4f1
6dfaaab992bbb18a60a767ca50e46ac69b983563fbbfe8a282b730ace5cb8645
T-shirts
hoodies
polos
totes

HEASY Technical Support

Through cooperation with world famous print head manufacturers and software suppliers, we integrate sophisticated and practical technology into our fabric printers.

One-Year Warranty (Extendable)

Standard 12-month coverage with optional 24/36-month extended care;

Installation & Onboarding

Step-by-step video and PDF guide for setup, calibration, and your first print.

Knowledge Base & Troubleshooting Docs

Quick guides for common issues with checklists and fixes.

Online Remote Guidance

Engineers provide real-time diagnosis and tuning via WhatsApp/Zoom/AnyDesk.

Frequently Asked Questions (FAQ)

Two Brother industrial piezo heads, min 3.5 pl.
400×500 mm on an A2 40×50 cm platen.
A4 light ~50 s, dark ~64 s; A3 light ~88 s, dark ~103 s (design-dependent).
Up to 10 mm with manual height adjustment (no auto lift).
No—size change via manual jigs/templates and re-leveling.
Measure the highest point (zipper/pocket), set the gap with a gauge, dry-pass before printing, keep the garment flat.
Keep circulation/agitation on; run timed purging & capping; do daily nozzle checks, clean wiper/cap.
Use matched pretreat; follow curing temp/time per ink/TDS; test after 24 h.
Artwork 300 dpi at size, RGB workflow; use ICC tuned to ink/pretreat; manage white underbase in the RIP.
Before shift: nozzle test, height/gap, platen level; After shift: purge, cap, clean wiper/plate, seal inks.
Usually not. Printing is only one part of the full process. Reactive typically requires pretreatment, sizing, steaming, washing and finishing. Pigment usually requires pretreatment, printing, drying and curing. High-temperature disperse requires a suitable heat-development route and finishing support. For real production projects, we recommend evaluating the investment as a complete line rather than as a standalone printer.
Routes such as reactive and high-temperature disperse may be discussed for switching after thorough tube cleaning and process re-evaluation, while pigment is usually better treated as a dedicated route. For stable long-term production, we also do not recommend frequent route switching on the same machine.
Full-shift stability usually depends on:
  • feeding and take-up stability,
  • tension and wrinkle control,
  • transport design for long-run operation,
  • ink supply stability,
  • cleaning and maintenance convenience,
  • control-system maturity,
  • and a professional RIP workflow.
Yes. We support RIP software such as NEOSTAMPA and TEXPRINT, and we can provide software operation guidance as needed. On the service side, we provide online support, basic training and post-installation operation guidance. The standard machine warranty is typically 1 year. For complete production projects, we can also discuss operator training, process coordination and follow-up maintenance planning.

DTG 4050 Specifications

SpecificationDTG 4050
Print Format
Max 400x500 mm
Printhead
4x Brother industrial piezo heads (intelligent droplet conversion)
Minimum Droplet Size
3.5 pl
Nozzle Configuration
Dual print heads color & white independently controlled
Print Direction
Bi directional / Uni directional
Ink Type
Water based pigment ink
Ink Color
CMYK + White
Ink Specifications
1 L bottle or 5 L barrel
Ink Capacity
1500 ml
Print Area
Standard platform 400 x 500 mm (special sizes optional)
Print Speed Light Fabric (A4/A3)
50 s / 88 s per piece
Print Speed Dark Fabric (A4/A3)
64 s / 103 s per piece
Max Garment Thickness
Up to 10 mm manual height adjustment
Interface
Gigabit NIC
Language
Chinese / English
Operating System
Windows 10 or later
Host Memory
16 GB
Environment ÿ Temperature
Recommended 15-25 C
Environment ÿ Humidity
Recommended 40-60%
Dimensions (W x D x H)
1473 mm x 1126 mm x 817 mm
Weight
95 kg
Power Supply
AC 100-240 V 50/60 Hz
Power Consumption
Running 140 W / Standby 100 W

Get a Detailed Quote

Tell us about your application, size and output. We’ll recommend the right model, lead time and budget within 24 hours.

Chat with us 👋