HY-401

The HY-401 prints up to 300 mm (30 cm) wide on PET transfer film - well suited to A3 sampling, on-demand jobs and short DTF runs.

A single Epson XP600 printhead with variable-dot output, delivering smooth gradients and crisp micro-text in the CMYK + White DTF configuration.

The white-ink line uses auto stirring and continuous circulation, plus scheduled purging and capping, to reduce sedimentation during idle periods and minimize daily maintenance time.

No. DTF is a transfer process: print artwork on PET film, apply adhesive powder, cure, then heat-press to the garment at 150–165 °C for 8–15 s. No pretreatment, no weeding, no screens.

The HY-401 runs at roughly 1.2 m²/h in 6-pass mode (design-dependent), sized for sampling, one-offs and short DTF runs rather than high-volume production. For 600 mm production width on the same DTF workflow, step up to the dual-head HY-702.

DTF transfers bond to virtually any fabric - cotton, polyester, cotton/poly blends, nylon, canvas and leather, light or dark - with no garment pretreatment. You print artwork on PET film, apply adhesive powder, cure, then heat-press to the garment at 150-165 °C for 8-15 s.