Digital printing for care and wash labels
Print satin, nylon and cotton care-label ribbon up to 600 mm wide on the HY-60 pigment workflow, then cure.
Recommended machine configurations
Every line below is rendered from published product frontmatter, not a separate specification copy.
HY-60 Wash Label Printer
Dual Epson i3200-A1 heads, 600mm width, pigment ink on ribbon - for 6-up garment care labels.
- Print width
- 600 mm (60 cm)
- Printheads
- 2 × Epson i3200-A1
- Print speed
- Confirm for selected media, resolution and pass mode
- Media
- Ribbon / care-label tape - satin, nylon, cotton
Ink route and finishing chain
Start with the material selector, then keep each chemistry on its own published finishing route.
Care / Wash Labels
- Process
- Direct ribbon printing
- Ink options
- Compatible pigment
- Published width range
- up to 600 mm
Care-label pigment route
Final performance depends on media, ink and finishing
- Cure
Finished-product applications
Existing application photography shows the materials and end products this route is intended to qualify.
Blank ribbon Printed label 
Related production guides
Use the full guides for chemistry, workflow and machine-selection detail before quotation.
How No-Wash Pigment Printing Reduces Production Cost
A pigment no-wash route removes reactive printing's steam and wash stages. Compare the same job to quantify water, energy, labor and equipment effects.
Read the guide
Pigment Textile Printing - Fabric to Finished Product
Pigment textile printing: inspect, pretreat, print, dry and heat-fix within a qualified process window. It needs no dye wash-off; finishing may add an optional rinse.
Read the guide
Why Pigment Digital Printing Is Growing Fast: Five Key Drivers
Pigment digital printing is growing because process control, flexible order needs, environmental scrutiny, investment planning and industry comparison are advancing together.
Read the guide
R2R Ink Workflows: Reactive, Pigment and Disperse Printing
Reactive targets cellulose, pigment uses a surface binder across qualified fabrics, and disperse diffuses into polyester. Choose by fabric, process and fastness tests.
Read the guideCare and wash labels questions
What printheads does the HY-60 use?
The HY-60 uses two Epson i3200-A1 printheads configured for narrow-web pigment printing on ribbon media.
What are its maximum width and speed conditions?
The maximum print width is 600 mm. Production speed is quoted for the selected media, resolution and pass mode rather than as an unqualified linear maximum.
Which label materials are supported?
The published media range is satin, nylon and cotton ribbon or care-label tape.
Which ink route does the machine use?
It uses pigment ink, with OEKO-TEX-compliant options available. This is not a blanket certification claim for every ink configuration.
What is the process chain?
The published selector chain is printing followed by curing. Final wash performance depends on the media, ink and finishing process.
Qualify this solution on your production job
Send the fabric, target width, output and finishing capability for a configuration review.